Newland HR22 Dorada, User Manual

Page: 15 / 175

Enter Setup
1 *
* Exit Setup
Chapter 1 Getting Started
Introduction
The HR22 hand-held barcode scanner (hereinafter referred to as
“HR22 scanner”
or
“the scanner”
),
armed with the world-leading Newland patented , a computerized image recognition
system-on-chip, bring about a new era of 2D barcode scanner.
The HR22’s 2D barcode decoder chip ingeniously blends technology and advanced chip design &
manufacturing, which significantly simplifies application design and delivers superior performance and
solid reliability with low power consumption.
The HR22 supports all mainstream 1D and standard 2D barcode symbologies (e.g., PDF417, QR Code
M1/M2/Micro and Data Matrix) as well as GS1-DataBar
TM
(RSS) (Limited/Stacked/Expanded versions). It
can read barcodes on virtually any medium - paper, plastic card, mobile phones and LCD displays.
About This Guide
This guide provides programming instructions for the HR22. Users can configure the HR22 by scanning
the programming barcodes included in this manual.
The HR22 has been properly configured for most applications and can be put into use without further
configuration. Users may check the
Factory Defaults Table
in
Appendix
for reference. Throughout the
manual, asterisks (**) indicate factory default values.
Unpacking
Open the package and take out the scanner and its accessories. Check to make sure everything on the
packing list is present and intact. If any contents are damaged or missing, please keep the original
package and contact your dealer immediately for after-sales service.