RLP800 Users Manual
11
Using the biased weight kit
The Rhino line of equipment was designed to be used with our biased weight kit, which
allows our machines to be loaded with weights to increase point pressure for very hard
floors and to rapidly expose aggregate.
Our unique patented biased weight system uses standard Olympic weight plates,
allowing placement on either side of the machine to increase pressure when grinding
edges with slab curl and high and low spots.
Weights can also be placed on the handle to alleviate pressure and weight from the
machine, enabling the Rhino to be easily and effectively used for soft & rained out slabs.
For best results and to increase production we highly recommend utilizing weights with
your Rhino grinder.
Changing the drive belt
To view a video on how to change the drive belt – please visit our website at:
www.newgrind.com
Changing tools and accessories
WARNING:
Always turn grinder off and remove the key from the ignition before
performing any operations to the bottom of the machine!
When removing and inserting tool plates or adapter plates, be sure to inspect rubber grommets
for signs for wear and replace any damaged grommets.
WARNING:
Using grommets that are damaged or missing can cause unexpected
equipment operation and increase the chance of tool plate / adapter plate ejection or
violent vibration leading to loss of control of equipment!
To change the tools:
1.
Turn grinder off
2.
Use the biased weight kit peg on the lower part of the handle to help you tilt the
machine back and gently lay it on it’s back.
WARNING:
Do not attempt to replace tools that have recently been in use as they may be
hot and could cause injury
3.
Grasp the tool plate firmly in both hands and pull it towards you
4.
Remove the bolt from the back of the tool plate behind each tool to release the tool
Summary of Contents for RHINO RLP800
Page 16: ...RLP800 Users Manual 16...
Page 17: ...RLP800 Users Manual 17...
