14
To activate
Scanning
regime press and hold Action button
in Ready mode. The unit will work in
Scanning
regime
while Action button is pressed.
Scanning
or
Individual Measurement
regimes are
available for any selected mode of measurement. When
two or more parameters are measured in
Scanning
regime
though first result will be displayed, the second and other
results will be shown at the display if Action button is
released. Nevertheless all data is transferred to the PC and
recorded in internal memory, and may be recalled (see
Data Recall mode
for details.)
Operation and service modes
Pressing Mode button (5, Fig.1.1) in
Ready
mode
switches the unit between modes of operation, to activate
any desired mode from the menu you must confirm your
selection by pressing Action button (6, Fig.1.1).The unit
has the following modes of operation:
Ready
– Unit is ready to perform measurements
dFLt
– sets default mode of operation with factory
settings,
GAtE
– allows to set gating distance for
measurement
Std
– allows the user to select single action
measurements:
o
Distance only (
d)
