Newcon Optik LRB 7x50 Operation Manual Download Page 7

 

 

6. STORAGE AND MAINTENANCE INSTRUCTIONS. 

 

Precautions: 

LRB is a sophisticated precision optical instrument 

equipped with electronics. Therefore, it should be handled with 
due care. 

 

Keep your device away from direct sunlight, impacts, dust, 
moisture, and sudden changes of temperatures. 

 

Do not use the device at temperatures higher than 50

o

(122

o

F). 

 

 

Do not touch the optical surfaces with fingers.  Doing so 
may damage the anti-reflection coating. 

 

 

Avoid shocks and sharp jolts. 

 

Cleaning of optical surfaces is allowed with professional 
camera lens cleaning supplies only. 

 

 

To clean the exterior of the device, use a soft clean cloth.   

 

Keep away from heating appliances and central heating. 

 

Remove the battery when storing the device for long time. 

 

All repair works must be performed by an authorized service 
only. 

 

 
 

14 

4. 

TECHNICAL CHARACTERISTICS

 

1. Optics 

 

Magnification, x 
Objective lens, mm 
Exit pupil diameter, mm 
Field of view 
Type of coating 

50 

5

°

 

Fully multi-coated optics 

2. Range 

Finder 

 

Type 
Measuring range, m 
Accuracy 
'Last Target' measurement 
Meters/Yards display 
Last 10 readings recall 
Reticle shape (+ or 

G

Target quality indicator 

Class 1, eye safe, 905nm 

20 – 1,512 

±

 1m 

±

 0.1%  

Yes  
Yes 
Yes  
Yes  

Optional  

3. Speed 

Detection 

Model LRB 7x50SPD only 
 - Measured speed range, KMH 
 - Accuracy, KMH 

Yes 

5 – 400 

±

 1 

4. Misc. 

 

Battery 
'Low Battery' indicator 
Tripod thread 
Operational temperature range 
Storage temperature range 
Weight without battery, g 
Dimensions, mm 

9 V 

Yes 

¼” x 20 

-25 / +50

o

C (-13 / +122

o

F) 

-45 / +85

o

C (-49 / +185

o

F) 

1300 

210x150x80 

Summary of Contents for LRB 7x50











Reviews: