9
PRODUCT TRAYS:
1. To disassemble a product tray segment, telescope all trays down to one level, grasp the largest tray, and lift
it off the other trays. Repeat this process for the remaining trays.
2. To assemble the product trays, grasp the smallest tray and slide the second smallest tray down over the “T”
tabs of the smaller tray. Repeat this process for the remaining trays.
CONTROL HEART:
1. Turn the control heart assembly upside-down with the upper and lower cams (green color) facing up.
2. Remove the nut and lock washer from both cams. Remove the mounting screws from the two metal cross
braces and set cross braces aside.
3. Remove the upper and lower cam and also remove both metal cam bushings.
*Note: The upper cam has the shorter step and the lower cam has the longer step.
4. Turn the control heart assembly face up and remove the back-up actuator (gray color) by unsnapping it
from the mounting bosses.
5. Slide the back-up slide arm (gray color) up until the notch at the bottom of the slide arm lines up with the
horizontal round boss above. Continued on the next page.
