8
15. Remove the detent wheels from the base by
sliding the wheels out from the center until they
clear the retaining tabs of the base. Lift out the
detent wheel, the spring applicator (dark purple
color), and the spring.
16. To remove the lock member arm (gray color)
and the lock member latch (gray color), remove
spring and then lift them vertically from the
base.
* See Figure 15
17. Remove the lock member rocker (gray color)
by rotating the lock member rocker to the left
until it snaps out of the retaining bosses on the
base. Remove the rocker spring from the base.
Disassembly of Major Components
FRONT COVER:
1. Remove the door brackets B or C from each door by removing the screw on the back of the door bracket.
2. Remove the door handles by removing the screw on the underside of the handle.
3. Remove the doors by sliding them to the left and out of the front cover.
4. Remove the door vanes from the door by removing the mounting screws.
5. Remove all 4 lever covers from the front cover
by removing the screws underneath the lever
covers.
6. Remove all 8 door levers. Note: Lever “L” is
used on all 4 levels on the left side of the front
cover, and “R-1” is used on levels 1, 2, & 3 on
the right side of the cover. “R-2” is used on
level 4 on the right side of the front cover.
7. Remove the 3 front cover latches located on the
left side of the front cover by removing the
mounting screws form the back of the latches.
8. To reassemble the front cover, perform the
above steps in reverse order.
Fig 15
