Newco FKP-3 Manual Download Page 5

 

WARRANTY 

Applies to all equipment manufactured after 2/1/2017. This warranty supersedes  

all other previous warranties that are currently in manuals. 

 

Newco warrants equipment manufactured by it for 1 year parts and labor. 

Accessories and Dispensers 1 Year parts only. 

Electronic Circuit and Control Boards- 3 years parts, 1 year labor. 

Equipment manufactured by others and distributed by Newco- please see original equipment manufacturers 

warranty, Newco will follow. 

 

These  warranty  periods  run  from  the  date  of  sale  Newco  warrants  that  the  equipment  manufactured  by  it  will  be 
commercially  free  of  defects  in  material  and  workmanship  existing  at  the  time  of  manufacture  and  appearing  within 
the  applicable  warranty  period.  This  warranty  does  not  apply  to  any  equipment,  component  or  part  that  was  not 
manufactured  by  Newco  or  that,  in  Newco’s  judgment,  has  been  affected  by  misuse,  neglect,  alteration,  improper 
installation or operation, relocation or reinstallation, improper maintenance or repair, incorrect voltage applied to the 
unit at any time,   damage or casualty. This warranty does not apply to any  equipment failures  related to poor water 
quality, excessive lime and chlorine and non periodic cleaning and descaling. Warranty is null and void if muriatic or 
any  other  form  of  hydrochloric  acid  is  used  for  cleaning  or  deliming.  In  addition,  this  warranty  does  not  apply  to 
replacement  of  items  subject  to  normal  use  including  but  not  limited  to  user  replaceable  parts  such  as  faucet  seat 
cups, sight gauge tubes, washers, o-rings, tubing, seals and gaskets.  
 
 
This warranty is conditioned on the Buyer 1) giving Newco prompt notice of any claim to be made under this warranty 
by  telephone  at  (800)  556-3926  or  by  writing  to 

3650  New  Town  Blvd,  Saint  Charles,  MO  63301

;  2)  if  requested  by 

Newco,  shipping  the  defective  equipment  prepaid  to  an  authorized  Newco  service  location;  and  3)  receiving  prior 
authorization from Newco that the defective equipment is under warranty. 
 
THE  FOREGOING  WARRANTY  IS  EXCLUSIVE  AND  IS  IN  LIEU  OF  ANY  OTHER  WARRANTY,  WRITTEN  OR  ORAL, 
EXPRESS  OR  IMPLIED,  INCLUDING,  BUT  NOT  LIMITED  TO,  ANY  IMPLIED  WARRANTY  OF  EITHER 
MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE.  The  agents,  dealers  or  employees  of  Newco  are 
not  authorized  to  make  modifications  to  this  warranty  or  to  make  additional  warranties  that  are  binding  on  Newco. 
Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be 
relied upon. 
 
If  Newco  determines  in  its  sole  discretion  that  the  equipment  does  not  conform  to  the  warranty,  Newco,  at  its 
exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or 
labor  (during  the  applicable  parts  and  labor  warranty  periods  specified  above)  to  repair  the  defective  components, 
provided that this repair is done by a Newco Authorized Service Representative; or 2) shall replace the equipment or 
refund the purchase price for the equipment. 
 
THE BUYER’S REMEDY AGAINST NEWCO FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF 
THIS EQUIPMENT, WHETHER DERIVED FROM 

WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT NEWCO’S SOLE 

OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. 
 
In no event shall Newco be liable for  any other damage or loss, including,  but not limited to, lost profits, lost sales, 
loss  of  use  of  equipment,  claims  of  Buyer’s  customers,  cost  of  capital,  cost  of  down  time,  cost  of  substitute 
equipment, facilities or services, or any other special, incidental or consequential damages. 

 
 
 
 

Summary of Contents for FKP-3






















Reviews: