Newco B-10-T3, Operating Instructions Manual

Page: 14 / 29

14
Programming-Cont’d
Setup
1. Press “Coffee-Regular” Button to Select “Setup”
2. Press “Café Latte” Button to Toggle display
Water Temperature Setting (170-205 F)
Buzzer volume 0-25
Filter Monitoring (On or Off)
Filter size 500 1000 1500 5000 gallons (Only displays if “ON”)
Energy Save (Off, Semi [140F], Full [0FF]
Energy Time -.5 to 4.0 Hrs After Last push (Only displays if “ON”)
Assign Recipes To Buttons *See Page 15
Edit Global Ratio (Default Ratio is 30:1-Can change to 25, 35, 40, 45:1)
Call for service # (Re-settable phone Number) *See Page 16
Powder Tracking (On or Off)
Left Hopper Value-Grams of Chocolate in a full hopper (Only displays if “ON”)
Center Hopper Value-Grams of Milk in a full hopper (Only displays if “ON”)
Right Hopper Value-Grams of Milk in a full hopper (Only displays if “ON”)
Cup Light (Dispense, On or Off)
Exit Setup
 Water Temp Setting-Factory Default is 185 Deg F
 Buzzer Volume-Factory Setting is 13, + or - to hear volume change
 Filter Size-Select Filter size- 0 turns Filter Tracking off-If turned on
filter size selections in gallons are: 500, 1000, 1500, 2000, 2500 and
3000. Message to change filter will appear when gallon usage is
exceeded
 Energy Save-Selecting Partial or Full Mode asks delay time in hours
after last drink has been dispensed (1-4 Hours)

Assign Recipe to Buttons (See Page 15)

Edit Global ratio allows the use of Coffee concentrate ratios of 25:1,
30:1, 35:1, 40:1 and 45:1. Default value is 30:1
 Call For Service #-See Page 16
 When Powder Tracking is turned “ON” Message to Refill Hopper will
appear when hopper is low. Flavored, Chocolate and Milk Hopper
values are the weight of the powder only in a full hopper. Default
values are 2050 Grams for Flavored, 2050 for Chocolate and 1250
Grams for Milk. These values can be changed by toggling, step (3),
above. Hoppers will automatically reset when removed from the
machine for more than 15 seconds .
3. Use to
Change
Values
UP
or
DOWN