Newave_OPM_PV11_PV31 _GB_250805.doc Operation
Page 23
4 Operation
4.1 COMMISSIONING
The
PowerValue
TM
UPS is a high quality electronic machine that must be commissioned by a fully
trained and authorized NEWAVE field service engineer before being put into use.
The commissioning of the UPS involves the connection of the UPS and battery, the checking of the
electrical installation and operating environment of the UPS, the controlled start-up and testing of the
UPS and customer training.
Any
PowerValue
TM
UPS system not commissioned by a NEWAVE field service engineer or
authorized service centre must be considered an electrical hazard and NEWAVE accepts no
responsibility for its safe operation or the safety of any personnel. Additionally, the manufacturer’s
warranty is immediately invalidated if the UPS is put into use before it has been correctly
commissioned
4.2 CONTROL
PANEL.
The user-friendly control panel is composed of three parts:
•
POWER MANAGEMENT LCD DISPLAY (PMD);
•
LED INDICATORS;
•
KEYS.
Figure 4.1 Control Panel PowerValue
TM
.
4.2.1 Power Management Display (PMD)
The 2 x 20 character LCD simplifies the communication with the UPS and provides the necessary
monitoring information about the UPS.
The menu driven LCD enables the access to the:
•
EVENT REGISTER;
•
Monitor the input and output U, I, f, P,
•
Battery runtime;
•
To perform commands like start-up and shut-down of UPS and
•
Load transfer from INVERTER to BYPASS and vice-versa;
•
DIAGNOSIS (SERVICE MODE);
•
Adjustments and testing.
PowerValue
ON/OFF
RESET
Ï
Ð
ENTER
ON/OFF
Alarm
Line 2
Bypass
Line 1
Inverter
Battery
