background image

18 

 

newair.com

 

LIMITED MANUFACTURER’S WARRANTY

 

This appliance is covered by a limited manufacturer’s warranty. For one year 

from the original date of purchase, the manufacturer will repair or replace any 
parts of this appliance that prove to be defective in materials and 
workmanship, provided the appliance has been used under normal operating 
conditions as intended by the manufacturer. 

Warranty Terms: 

During the first year, any components of this appliance found to be defective 
due to materials or workmanship will be repaired or replaced, at the 

manufacturer’s discretion, at no charge to the original purchaser. The 

purchaser will be responsible for any removal or transportation costs. 

Warranty Exclusions: 

The warranty will not apply if damage is caused by any of the following: 

 

Power failure 

 

Damage in transit or when moving the appliance 

 

Improper power supply such as low voltage, defective household 
wiring or inadequate fuses 

 

Accident, alteration, misuse or abuse of the appliance such as using 
non-approved accessories, inadequate air circulation in the room or 
abnormal operating conditions (extreme temperatures) 

 

Use in commercial or industrial applications 

 

Fire, water damage, theft, war, riot, hostility or acts of God such as 
hurricanes, floods, etc. 

 

Use of force or damage caused by external influences 

 

Partially or completely dismantled appliances 

 

Excess wear and tear by the user 

Obtaining Service: 

When making a warranty claim, please have the original bill of purchase with 
purchase date available. Once confirmed that your appliance is eligible for 

warranty service, all repairs will be performed by a NewAir™ authorized repair 

facility. The purchaser will be responsible for any removal or transportation 
costs. Replacement parts and/or units will be new, re-manufactured or 

refurbished and is subject to the manufacturer’s discretion. For technical 

support and warranty service, please email [email protected] 

Summary of Contents for NEC500SI00



















Reviews: