8
http://www.NewAir.com
After turning on the wine cooler, the LED display will show the ambient
temperature first, and then the internal cabinet temperature.
After you set the desired temperature, this set temperature will flash for 5
seconds on the display and then revert back to the internal cabinet
temperature.
OPTIMIZING PERFORMANCE
To ensure maximum performance and efficiency, be sure to place your
wine cooler in an area where there is proper air circulation. (See
Installation instructions above for proper clearances.)
For proper internal air circulation, do not overfill your wine cooler.
Do not place the unit in direct sunlight.
Do not place heated beverages in your wine cooler.
Do not store perishable food in your wine cooler. The unit’s interior
temperature may not be low enough to prevent spoilage.
Do not place heavy objects on top of the wine cooler.
CLEANING & MAINTENANCE
CLEANING YOUR COOLER
To clean your cooler:
Unplug the cooler and remove anything inside.
Wash the inside of the unit with a solution made of warm water and
neutral detergent. Do not use abrasive cleaners.
Use mild, soapy water to clean the unit’s door seal.
To ensure efficient operation, also thoroughly clean the back and
bottom of the wine cooler.
To clean the outside of the unit, use a mild detergent and warm water.
