3.1. Controller
Below in Figure 3 are all of the input/output ports in the
E SERIES
.
1.
Main Input Power Connector
– (115V AC) or (220V AC).
2.
Ethernet Communication Port
– Ethernet to Serial Port Cable Provided to
connect your E-RAD to a PC for calibration and data retrieval
.
3.
Connectors for Pistol Grip Torque Gun
– Military style connector provide
a protected interface between the Controller and the Hand Held Tool.
3
1
2
Figure 3: Controller Connections
Below in Figure 4 the user interface is outlined:
1.
3 Button Touch Pad Overlay
– Provides the user the ability to
increase/decrease torque / angle and change the units of measurement.
2.
LCD Display
– Visual feedback of the torque setting, torque achieved, preset
angle and direction of rotation.
3.
Main Power Switch
– This switch will turn the E-RAD on / off.
4.
Green Power Light
– This light will illuminate when the power is turned on.
3
2
4
1
Figure 4: User Interface
4
