Menu
Submenus
38
Manual TFT Position indicators
Overview of USB services
Design import
This option is used to import onboard designs and custom designs from a USB
stick to the TFT.
►
You can create your custom design using the software
EAZ Designer
.
See the EAZ Designer manual.
►
Before importing, check that the design has the correct resolution, orientation
and so on.
►
If necessary, create the directory
designs
on the USB stick.
►
If necessary, create the subdirectories
int
and
eaz
in the
designs
directory.
•
Onboard designs must be stored in the
int
subdirectories.
•
Custom designs must be stored in the
eaz
subdirectories.
►
Confirm the action
to start the data transfer.
See „Confirming action“ page 26
•
If YES is selected, the designs (onboard and custom design) of the TFT are
overwritten with the data from the USB stick.
The overwrite query is intended to prevent the onboard design from being
overwritten.
•
If NO is selected, only the custom design of the TFT is overwritten with the
data from the USB stick.
Design export
This option is used to export the onboard design and the custom design from a
TFT to the USB stick.
►
Make a backup of designs already on the USB stick.
Any data in the
designs
directory will be overwritten.
►
Check the available memory:
•
< approx. 10 MB (onboard design)
•
< approx. 50 MB (custom design).
SAM import
This option is used to import your SAM project from a USB stick to the TFT.
►
You can create your SAM project using the
SAM Editor software
.
See SAM-Editor manual
.
►
Before importing, check that the data has the correct resolution, orientation
and so on.
►
The SAM project structure must be stored on the USB stick. This consists of at
least one directory called
CONF
and one directory called
SOUNDS
.
