![New Leader L5034G4 AGCO Operator'S Manual Download Page 10](http://html1.mh-extra.com/html/new-leader/l5034g4-agco/l5034g4-agco_operators-manual_1677966010.webp)
- 10 -
www.NewLeader.com
(800) 363-1771
306375-AA-E
L5034G4 AGCO
HANDLE HAZARDOUS MATERIALS SAFELY
Figure 1�5 - Materials to spread can be dangerous�
Improper selection, application, use or handling may be a hazard to
persons, animals, plants, crops or other property�
A Safety Data Sheet (SDS) provides specific details on chemical
products: physical and health hazards, safety procedures and
emergency response techniques�
Check the SDS before starting any job using a hazardous material�
Follow all instructions and precautions given by the material
manufacturer�
Figure 1�5
WORK IN WELL-VENTILATED AREAS
WARNING
Never run machine engine inside a building unless
adequate ventilation is provided to safely and
properly remove exhaust fumes�
Figure 1�6 - Always work in a properly ventilated area�
Engine exhaust fumes can cause sickness or death� If it is necessary
to run an engine in an enclosed area, use proper equipment to safely
remove exhaust fumes from the working area�
Open building doors and get fresh air into the working area whenever
possible�
Figure 1�6
PROTECT AGAINST NOISE
Figure 1�7 - Long periods of exposure to high decibles or loud noise
can cause hearing impairment or loss�
Wear proper hearing protection during periods of exposure to high
decibels or loud noise�
Wear a proper hearing protective device such as earmuffs or earplugs
to protect against high decibels and / or uncomfortable loud noises�
Figure 1�7
Operations
General Safety Rules