NJT8302 series Instruction Manual
Page 8
Operate the Unit within the ambient temperature range of -40
to +55 degree C.
2.2. Instruction Statements
1. Mounting
5. Input Level
IM-T8302 Rev.01
4. High Temperatures
DO NOT block the fins.
Normally the Unit should be mounted with long fins face up.
2. Weatherproof
DO NOT touch the body, especially fins, during operating the
Unit.
High touch temperatures may exist, depending on load
conditions.
DO NOT input an IF signal over the range of +13 dBm
maximum and a reference signal within the range of -5 to +5
dBm.
6. Operating Temperature.
The Unit is mounted outdoors must be adequately
weatherproofed.
Ensure the waveguide joints are properly sealed with the
supplied o-ring (gasket).
Use self-amalgamating tape to seal connectors and cable entry
points from the connector to the cable sheath.
