manualshive.com logo in svg

New Japan Radio NJT8302 series, Instruction Manual

Share
Download
New Japan Radio NJT8302 series Instruction Manual Download Page 5

NJT8302 series Instruction Manual

Page 5

950

   to 1,700 MHz

 NJT8302N

14.00

   to 14.50 GHz 13.05 GHz

950

   to 1,450 MHz

10 MHz

 NJT8302F

 NJT8302UF

 NJT8302UN 13.75

   to 14.50 GHz 12.80 GHz

Standard Ku-band, F-type female Interfece Connector

The detail of frequency for the reference, IF, RF and local oscillaton is mentioned

in a chart below.

Model

Number

RF

Frequency

Local Oscillation

Frequency

IF

Frequency

Refefence

Frequency

Standard Ku-band, N-type female Interfece Connector

 NJT8302UF

Model Number Line-up Description

 NJT8302N

Universal Ku-band, N-type female Interfece Connector

 NJT8302F

Universal Ku-band, F-type female Interfece Connector

 NJT8302UN

Universal Ku-band 3W BUC (Model No.: NJT8302UN and NJT8302UF) receives a

reference signal (10 MHz) and an IF signal (L

‐

Band: 950 to 1,700 MHz) input and

transmits an RF signal (Universal Ku-band: 13.75 to 14.5 GHz) output.

The line-up is mentioned in a chart below.

The Unit comes in a single, weatherized housing rated for outdoor use.   The Unit

has either an N-Type or a F-type female connector input, a WR75 waveguide

output.   The Unit  is operated by +24 V DC power (Range: +15 to +30 V) input.

This instruction manual is for Ku-band 3W BUCs with following model number:

NJT8302N, NJT8302F, NJT8302UN, and NJT8302UF.

1. Introduction

Standard Ku-band 3W BUC (Model No.: NJT8302N and NJT8302F) receives a

reference signal (10 MHz) and an IF signal (L

‐

Band: 950 to 1,450 MHz) input and

transmits an RF signal (Standard Ku-band: 14.0 to 14.5 GHz) output.

IM-T8302 Rev.01

Summary of Contents for NJT8302 series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands