New Image Maxi-Glider 360, User Manual

Page: 10 / 19

Using the Progress Tracker
PULSE
TIME
SCAN
RESET MODE
COUNT
CAL
RPM
PLEASE NOTE: The progress tracker will only turn on when the equipment is in use to preserve battery life.
WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death. If you
feel faint, stop exercising immediately.
Modes:
Pulse – Check your heart rate when
you grip the heart rate monitor
sensors on the stationary handles.
Time – Measure the duration
of your workout.
Scan – Get an overview of each
mode as you workout.
Count – Measure the number of strides
you achieve during your workout.
Cal – Watch the number of calories
you’re burning increase as you workout.
RPM – Keep to a set pace by following
your revolutions per minute.
Reset:
Use this button to reset the specs to zero
for your next workout.
Battery:
1. Use type 2 x AAA alkaline
batteries (included).
2. Install only new batteries of the
same type in your product.
3. Failure to insert batteries in the correct
polarity, as indicated in the battery
compartment, may shorten the life of
the batteries or cause batteries to leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-
Zinc) or Rechargeable (Nickel Cadmium)
or (Nickel Metal Hydride) batteries.
6. Do not dispose of batteries in fire.
7. Batteries should be recycled or disposed
of as per state and local guidelines.
10