New Holland Workmaster 50, Operator'S Manual

Page: 146 / 184

7 - MAINTENANCE
Four-Wheel Drive (4WD) front axle differential oil - Change fluid
1. Remove the drain plug (1) and collect the oil in a suit-
able container.
2. Replace the plug and fill the differential with oil at fill
plug (2) until oil level is at the bottom of the fill port.
96096503
1
3. Add NEW HOLLAND AMBRA MULTI G 134™ HY-
DRAULIC TRANSMISSION OIL hydraulic oil through
fill port, until correct oil level is obtained.
4. The capacity for the differential is 5.5 l ( 5.8 US qt ).
Four-Wheel Drive (4WD) front axle hub oil - Change fluid
1. Drain the front axle hub oil by positioning the wheel so
the filler plug (1) is closest to the ground. Remove the
plug and allow the oil to drain.
76073648N
1
2. Reposition the wheel so the filler hole (2) is level with
the center of the hub, midway from the top to the bot-
tom. Fill the hub until the oil level is at the bottom of the
fill port.
3. Add NEW HOLLAND AMBRA MULTI G 134™ HY-
DRAULIC TRANSMISSION OIL hydraulic oil through
fill port, until correct oil level is obtained. The capacity
for the hub is
1.2 l ( 1.3 US qt ).
76073647N
2
7-36