New Holland W130, Workshop Manual, Page: 29 / 41

GENERALITIES
Carefully read personal and machine SAFETY PRECAUTIONS (at the beginning of this manual)
0 - 23 W130/W130TC
STANDARD TORQUE SPECIFICATION
TORQUE SPECIFICATIONS - DECIMAL HARDWARE
Use the torques in this chart when special torques
are not given. These torques apply to fasteners with
both UNC and UNF threads as received from suppli-
ers dry, or when lubricated with engine oil. Not appli-
cable if special graphitiesm Molydisulfide greases, or
other extreme pressure lubricants are used.
Grade 5 Bolts, Nuts, and Studs
Size
Pound- Newton
Inches metres
1/4 inch 108 to 132 12 to 15
5/16 204 to 252 23 to 28
3/8 inch 420 to 504 48 to 57
Size
Pound- Newton
Feet metres
7/16 inch 54 to 64 73 to 87
1/2 inch 80 to 96 109 to 130
9/16 inch 110 to 132 149 to 179
5/8 inch 150 to 180 203 to 244
3/4 inch 270 to 324 366 to 439
7/8 inch 400 to 480 542 to 651
1.0 inch 580 to 696 787 to 944
1-1/8 inch 800 to 880 1085 to 1193
1-1/4 inch 1120 to 1240 1519 to 1681
1-3/8 inch 1460 to 1680 1980 to 2278
1-1/2 inch 1940 to 2200 2631 to 2983
Grade 8 Bolts, Nuts, and Studs
Size
Pound- Newton
Inches metres
1/4 inch 144 to 180 16 to 20
5/16 288 to 348 33 to 39
3/8 inch 540 to 648 61 to 73
Size
Pound- Newton
Feet metres
7/16 inch 70 to 84 73 to 87
1/2 inch 110 to 132 149 to 179
9/16 inch 160 to 192 217 to 260
5/8 inch 220 to 264 298 to 358
3/4 inch 380 to 456 515 to 618
7/8 inch 600 to 720 814 to 976
1.0 inch 900 to 1080 1220 to 1465
1-1/8 inch 1280 to 1440 1736 to 1953
1-1/4 inch 1820 to 2000 2468 to 2712
1-3/8 inch 2380 to 2720 3227 to 3688
1-1/2 inch 3160 to 3560 4285 to 4827
Note – Use thick nuts with Grade 8 bolts.