New Holland W130, Workshop Manual, Page: 13 / 41

GENERALITIES
Carefully read personal and machine SAFETY PRECAUTIONS (at the beginning of this manual)
0 - 7 W130/W130TC
SAFETY RULES
DECOMMISSIONING THE MACHINE
For the decommissioning of the machine, the availability
of particular tooling (hoists, hydraulic presses. contain-
ers for liquids etc.) is required as well as specific tools
listed in the Repair Manuals, available from FIAT
KOBELCO Dealers.
This has the purpose of avoiding that during disassem-
bly operations, dangerous situations may arise both for
the personnel involved and the environment.
In the machine are present:
• Fluids under pressure (hydraulic system, cooling
system etc.)
• Gases (air conditioning system and accumulator, if
installed)
• Mechanical devices mounted under pressure (track
tensioner etc.)
• Heavy machine components (frames, blades, buck-
ets etc.)
WARNING
• The decommissioning of the machine must be
performed exclusively by personnel trained,
qualified and authorised to perform such op-
eration.
• Start the disassembly of hydraulic components
only after the same, the hydraulic oil and lubri-
cants have fully cooled-off and after all residual
pressures have been released, as described by
the Repair Instruction Manual.
• Prior to proceeding with disassembly opera-
tions, comply with the
GENERAL SAFETY
RULES and drain each components of the ma-
chine filled with fluids, both in the reservoirs
and the relevant systems.
WARNING
Ensure that the attachment is safely resting on to the ground before repairing,adjusting, or servicing
machines fitted with hydraulically, mechanically or cable controlled attachments (such as excavators,
loaders, dozers, scrapers, etc.). Should it be necessary to partially or fully raise the hydraulically, me-
chanically, or cable controlled attachment to gain access to certain items, make sure the attachment is
adequately retained in the raised position by means other than the hydraulic lift cylinders, cable and/or
mechanical devices used for controlling it.