SECTION 10 -- ENGINE -- CHAPTER 1
10-31
4. Connect the clutch housing, 1, to the engine, 2,
and install the bucket-up bolts, 3.
5. Reinstall the starter, 4, and secure with the
retaining nuts. Connect the wiring harness, 5, to
the starter.
6. Tighten the buckle-up bolts, 3, in a criss--cross
pattern. Torque the M10 bolts and nuts to 68 N
⋅
m
(50 ft-lb) Torque the two M12 bolts to 81 N
⋅
m (60
ft-lb).
7. Remove the chain hoist and sling from the engine
hoist eyes. Remove the floor jack from under the
tractor.
86071895
5
4
3
1
2
17
