SECTION 10 -- ENGINE -- CHAPTER 1
10-27
15. Attach a chain sling to the two hoist eyes, 1.
16. Attach a suitable hoist to the chain sling.
NOTE:
The hoist is used for supporting the engine
and axle assembly, not necessarily for lifting.
17. Roll a floor jack under the rear of the tractor, and
place under the clutch housing. Raise the jack
enough to support the drive train.
86071896
1
7
18. Remove the buckle-up bolts, 1, and starter, 2,
that secure the engine, 3, to the clutch housing,
4.
NOTE:
The hoist and/or floor jack may need to be
raised or lowered to allow for separation of the
engine and clutch housing.
19. Carefully roll the drive train away from the
engine, using the floor jack for support.
86071895
2
1
3
4
8
