New Holland T8.295 Service Manual Download

Page: 58 / 61

Engine - Engine and crankcase

42. Remove the six socket head bolts

(1)

and three back-

ing plates

(2)

securing the drive shaft assembly to the

engine drive pulley. Disengage the drive from the pul-
ley.

RCPH10CCH562AAB

43. Remove the nuts and washers

(1)

from the cooling

assembly support bracket on the left and right sides.

RCPH10CCH572AAB

44. Properly support the bracket, and remove the four

bolts

(1)

securing the bracket to the hood support. Re-

move the assembly. Set the assembly aside.

RCPH10CCH037BAB

45. Loosen the clamp

(1)

and disconnect the coolant fill

line.

46. Loosen the nuts

(2)

and

(3)

and disconnect the cab

heater supply and return lines.

47. Disengage the clamp

(4)

and remove the air bleed

hose.

48. Remove the three bolts

(5)

securing the front support

bracket.

RCPH10CCH038BAB

47681318 16/05/2017

10.1 [10.001] / 11

Summary of Contents for T8.295






























































Search results

Summary of Contents for T8.295

Reviews:

Related manuals for T8.295

Brands by name

Popular brands

New Holland T8.295, Service Manual

Search results

Summary of Contents for T8.295

Reviews:

Related manuals for T8.295

Brands by name

Popular brands