New Holland H8060, Service Manual

Page: 17 / 51

INTRODUCTION
Make sure steps, ladders, and platforms remain clean and clear of debris and foreign substances. Injury may result
from slippery surfaces.
Face the machine when mounting and dismounting.
Maintain a three-point contact with steps, ladders, and handholds.
Never mount or dismount from a moving machine.
Do not use the steering wheel or other controls or accessories as handholds when entering or exiting the cab or
operator’s platform.
Header lift locks
Do not work under the machine header unless it is securely blocked and/or the header safety latch is engaged.
Header will fall rapidly if hydraulic lift system should fall.
Rest header on ground or engage lift cylinder lockouts when working around raised header.
The header lift locks are engaged on the left-hand side of the machine by pushing handle rearward.
NHIL12WR00239AA
3
47487696 17/01/2013
13