INTRODUCTION
Safety rules - (Machine service)
D150B XLT, With cab, Tier 3, Power Angle Tilt (PAT) Blade, Made in Brazil
[N9AC03000 - ]
LA
NOTICE:
Carefully read the Operation and Maintenance Manual before you turn on, operate, perform maintenance,
fuel, or repair the machine in any way.
Safe maintenance
• Unexpected machine movement can cause serious in-
jury.
• Place a “Do Not Operate” tag on the ignition key before
you start any maintenance procedure on the machine.
• Observe, understand, and follow the instructions on all
safety decals on the machine. If you have any ques-
tions, see the “Safety Decals” section in this manual.
• Keeps all safety signs and decals clean and legible.
NOTE:
Replace decals that are unreadable, damaged, or
missing, as required.
SP0043
1
• Never allow unauthorized persons without training or
knowledge of the machine to perform maintenance
tasks.
• Follow all of the recommended maintenance and ser-
vice procedures.
• Do not leave the operator's seat if the operation requires
that the engine remains on. If necessary, call another
person to assist you in the verification procedure with
the machine in operation.
• Keep all machine components in good condition and
installed correctly.
• Immediately repair any fault.
• Replace worn or failed components.
• Remove grease, oil, and accumulated debris.
SP0039
2
Moving parts
• Keep hands and clothing away from moving parts.
• Do not wear rings, wrist watches, jewellery, loose or
hanging garments, such as ties, torn clothing, scarves,
unbuttoned or unzipped jackets that can get caught by
movements of rotating components.
SP0041
3
47998875B 21/05/2018
15
