New Holland 715695001, Operator'S Manual

Page: 16 / 44

Operation
14
Attachment Power Lift
The attachment power lift (optional on some models)
(Fig. 9) is used to raise and lower attachments.
Raising Attachments
1. Turn key to the “ON” or “RUN” position
(Fig. 9).
2. Push the lift switch in the “UP” direction to raise
the attachment lift (Fig. 9). This will lift and
hold the attachment in the up, or raised position.
Lowering Attachments
1. Turn key to the “ON” or “RUN” position
(Fig. 9).
2. Push the lift switch in the “DOWN” direction to
lower the attachment lift (Fig. 9). This will lower
the attachment lift.
2266
2
1
3
Figure 9
1. Key
2. Lift switch UP
3. Lift switch DOWN
Adjusting Dial-A-Height
The Dial-A-Height control (Fig. 9) is used to limit the
downward travel of the attachment. The
Dial-A-Height knob is rotated to change the location
of this stop, up or down.
1. Raise the attachment lift lever: Refer to Raising
Attachments. In the raised position the
Dial-A-Height knob (Fig. 9) can be rotated to
change the stop location. Turn clockwise to raise
and counterclockwise to lower the height of the
attachment.
2. The Dial-A-Height indicator (Fig. 9) will show
the change, high to low, in attachment lift height
as adjustment is made.