New Holland 140TL, Original Instructions Manual

Page: 6 / 86

1 - GENERAL INFORMATION
Intended use
The loader was designed to mount on NEW HOLLAND
approved tractors. The loader is designed to load and
move materials with a variety of buckets and approved
NEW HOLLAND attachments.
DO NOT use this machine for any purpose or in any man-
ner other than as described in the manual, decals, or
other product safety information provided with the ma-
chine. These materials define the machine’s intended
use.
Use only approved accessories and attachments de-
signed for your machine. Consult your dealer on changes,
additions or modifications that may be required for your
machine. Do not make any unauthorized modifications to
your machine.
Installation and operation instructions for certain hydraulic
valve sets, attachments and accessories may not be in-
cluded in this operator’s manual.
Use the publication received with the specific item.
In the case of hydraulic valves, refer to the tractor opera-
tor’s manual.
NOTICE: Loader frames are designed for specific trac-
tor models. Do not install a loader frame on a differ-
ent model than specified, without obtaining approval from
CNH America LLC.
Operator’s age
All persons who will be operating this machine shall pos-
sess a valid local vehicle operating permit and/or other
applicable local age work permits.
WARNING
IMPROPER OPERATION OF THIS MACHINE
CAN CAUSE DEATH OR SERIOUS INJURY.
MAKE SURE THAT EVERY OPERATOR:
-is instructed in the safe and proper use of this
machine.
-reads and understands the operator's manual
for this machine.
-reads and understands ALL safety signs on
the machine.
Failure to comply could result in death or se-
rious injury.
W0188A
Read and thoroughly understand this manual before op-
erating this machine. If you are an inexperienced opera-
tor, study this manual and receive operating instructions
from an experienced operator. Your dealer can assist you
in learning machine operation and show you proper op-
erating procedures. Keep this manual readily available,
preferably with the machine. If the original manual is dam-
aged, order a new one from your dealer.
1-2