New Holland 140TL, Original Instructions Manual

Page: 39 / 86

3 - OPERATING INSTRUCTIONS
Installing the quick-attach plate
1. Start the engine of the tractor and release the parking
brake. Slowly drive the tractor toward the quick attach
plate, positioning the loader boom in the middle of the
attachment points. Stop the engine of the tractor and
set the parking brake.
2. Insert the lower pivot pins (1) outward through the
quick attach plate (2) , and loader arms (3) .
3. Make sure the formed pin tabs (4) are properly in-
serted into cutout hole in the quick attach plate. Re-
peat steps 2 and 3 for the other side.
86060301
1
4. Insert the upper pivot pin (1) outward through the quick
attach plate (2) , thick spacer (3) , cylinder rod (4) , and
thin spacer (5) .
5. Make sure the formed pin tabs (6) are properly in-
serted into cutout hole in the quick attach plate. Re-
peat steps 4 and 5 for the other side.
86060302
2
6. Install the retaining rings (1) on all the mounting pins
(2) securing the quick attach plate to the loader.
NOTICE: If installing an earlier production quick attach
plate (without bushings) on a newer production loader with
longer attaching pins, install two spacer washers
(3) be-
tween plate ears and snap ring.
36086833
3
3-7