10 • Appendices NEW FOCUS, Inc.
Figure 4:
Power module
with the cover
open
4.
Remove the AC-voltage selection wheel from
the unit.
Do not attempt to rotate the wheel while it is still
in the power module; the wheel must be removed,
turned, and then reinserted for proper operation.
5.
Reinsert the wheel in the module so the desired
Ac voltage can be viewed in the power-module
window.
6.
Ensure the proper fuses for the new AC voltage
are installed (see “Appendix II: Fuses”).
7.
Close the power-module cover.
8.
Verify the proper voltage is showing through
the module window.
9.
Reconnect the AC power cord.
Model #:
Serial #:
Made in U.S.A.
WARNING
For continued protection against fire hazard, replace
only with the same type and rating of fuse.
Input VAC
90 - 120
200 - 250
CAUTION
Risk of electric shock, do not remove
cover. Refer servicing to qualified personnel.
10 - 250 VAC
1.2 - 0.5A, 48-66Hz
Fuse
2.0 A T
1.0 A T
0901
XX-XXXX
120Vac
~
100Vac
~
220Vac
~
AC-voltage
selection wheel
Fuses &
fuse holders
120Vac
0901 pwr supply rev C.fm Page 10 Friday, August 10, 2001 2:41 PM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
