STEP ONE
2
Insert arches into arch keystone ensuring they terminate flush
to the internal connector. The t
abs s
ticking out of the internal
connector should fit outside the arches. Ensure that the arches
are orientated properly as per illustration.
Fasten the arch system to the keystone
b
y installing the
screws into the 2 pre-drilled holes provided.
Invert the arch system and install two screws from the
b
ottom
of the keystone into the two pre-drilled flanges on either
side of the
b
ottom of the insert. This will connect the
b
ottom
of the arches to the insert.
Seal the
b
ottom hole on the keystone
b
y inserting the
b
ottom
plate as provided.
Install the top cap on the arch keystone. Push down firmly
so the cap locks into position.
Repeat for other arch.
Insert arch rafters
(6)
into the holes on the arches until they
b
ottom out inside the arches. There are “lock
ing tab
s” located
at each end of these rafters that once inserted into the holes
will lock into place.
The Florence Arbor
/ Arch
Assemble the Arch System
1
2
3
5
7
1
5
4
2
6
7
3
4
Keyst
one Inser
t
Keyst
one B
ody
www.newenglandarbors.com
www.newenglandarbors.co.uk
