NEW BRUNSWICK SCIENTIFIC CO28IR, Manual To Operation

Page: 21 / 62

9
New Brunswick Scientific User’s Manual
3.6 Installing Fan Cover & HEPA Filter
Install the fan cover ( as shown in Figure 2a below ) using the mounting pins on the
upper back and top front panels of the inner chamber. Orienting the fan cover as
shown (with the HEPA filter coupling ring facing down into the incubator chamber),
position the fan cover’s rear slots onto the rear pins; then, grasping the front edge of
the fan cover, lift it upward and flex it slightly until its front slots lock onto the
chamber’s front pins.
Install the HEPA filter (
as shown in Figure 2a below ): grasp the filter with two hands
and press it straight up onto the coupling ring until it snaps into place.
Figure 2a: Shelves, Humidity Pan, Fan Cover & HEPA Filter Installed
OUTER
DOOR
INNER
DOOR
HUMIDITY PAN
FAN
COVER
HEPA
FILTER
SHELF
STANDARD
SHELVES
COPPER RING
NOT INCLUDED