11
Trouble-shooting
Carry out the problem-solving measures described in the following section
before contacting Customer Support.
Turn off the DVD
player immediately as soon as you suspect a
malfunction. Unplug the power plug and check whether the DVD
player is unusually warm or whether smoke is rising from it.
/DVBT
/DVBT
Problem
Possible cause
Remedy
Disc cover not closed
Close disc cover
No disc inserted
Insert disc
Disc inserted the wrong way Insert disc with label facing up
Disc dirty or deformed
Clean disc, or insert other disc
Regional code of the player does not
match the regional code of the DVD
Purchase DVD with corresponding
regional code
The DVD player
does not work
Moisture on lens
Remove disc and turn off
DVD player for at
least two hours
Device not properly connected
Check connexions and
connect device in the correct way
Headphones connected
(loudspeaker off)
Pull out the headphones
DVD sound settings incorrect Check sound settings and set sound
correctly
No audio
Disc dirty or deformed
Clean disc, or insert other disc
TV screen is off or in the incorrect
video mode
Turn on LCD screen and/or set correct
video mode
No video
Device not properly connected
Check connexions and connect device in
the correct way
Poor video and/or
audio quality
Disc dirty or deformed
Clean disc, or insert other disc
Loop mode is switched on
Exit the loop mode
Repeated play
back of a section Disc dirty or deformed
Clean disc, or insert other disc
Obstacle between remote control
and DVD player
Remove obstacle
Remote control not pointed at DVD
player
Point remote control directly at DVD player
Remote control battery inserted the
wrong way
Check the battery's polarity and, if
necessary, insert battery correctly
Remote control
does not work
Battery too low or completely
discharged
Insert new battery
Specifications
Specifications are subject to change without notice.
Play mode
Disc mode
Video S/N ratio
Resolution
Frequency response
Audio S/N ratio
Dynamic range
Distortion
D/A Converter
NTSC/PAL
DVD,VCD, CD, MP3, CD-R, CD-RW, JPEG,
DVD+ -R/W, MPEG4,
65dB.
500 lines.
fs 96KHz: 20Hz-20KHz:+/-1dBI
90dB
80dB
< 0.5%
96KHz/24bit
Display Device
Screen Size
Video output
Audio output
Power Voltage
Power consumption
Color TFT-LCD
9 inches
2CH
DC IN 12V
15W
Parameter
Input Frequency
RF Input level
IF Bandwidth
Modulation
Decoder Format
Decoder Format
170~230MHz
470~860MHz
-25~-78dBm
7MHz and 8MHz
QPSK,16QAM,64QAM
MPEG4 AVC/H.264 HP@L4
MPEG2 [email protected]
MPEG-1 (layer1&2)
VHF: 174MHZ-230MHZ
UHF: 470MHZ-862MHZ
Item
Tuner
Video
Audio
Input Frequency
Screen shows
No Signal
Not connect DVB-T cable
Plug in the DVB-T cable
Incorrect setting
Set up correct parameter
Only sound, no
image on the
screen
No or incorrect connection
with AV cable
Connect the audio cable correctly
Press <TV/RADIO> key to shift into
TV mode
The program is aradio program
11
