4081 User Manual
Issue 3
Installing the software – PC
USB Driver
Before installing the control software, you will need to install a USB driver
on the PC to enable communication between the PC and the 4081.
This can be downloaded from:
http://www.ams-
neve.com/Sites/8/Files/Documents/Outboard/4081_USB_Driver.exe
Before installing the driver, please connect the 4081 by USB to the PC
and power it up.
Click the link to download the driver.
When presented with the option to either Run or Save, click Save and
specify a location for the file to be saved to.
Once it has downloaded, double click the file to run and install it.
The Windows operating system will be determined, as will the correct
driver for your system.
A Windows CMD screen will show the install by a series of progressing
dots.
For users with Windows 7 operating system, the driver has been
successfully installed once the CMD screen closes.
For users with XP or Vista operating systems, as the driver nears the end
of it's installation procedure, the CMD screen will close and the Taskbar
will show two messages:
The first will show that the driver has found new hardware and a USB port
has been detected.
The second will show that it is ready to use.
Once the USB driver has been installed, you can install the 4081 control
software.
- 11 -
