6
Master section rear Panel
Connectors for the Main spk l & r and Mix Out can be
found on both XLRs and DB25. It is recommended that
the DB25 connectors be used. The XLRs may come in
handy for guests who prefer to supply their own monitors,
or if a 2 track recording of a mix on a portable device is
desired.
The 2Trk1 Mon In is an external input to the Control
Room monitor section (2T1). Available on both DB25 and
XLR for convenience.
7.1 Input
DAW outputs or a device containing up to 8 outputs may
be connected here; the 7.1 Input feeds the Control Room
monitor section and can be selected here in order to
monitor up to 8 channel surround sound via the Surround
Spk (Alt 2) outputs.
surround spk (alt 2)
Up to 8 surround monitors can be connected here. When
Alt 2 is selected as the monitor source in the Control
Room section, the group cuts and solos will effect the
eight individual speaker outputs. Note that a third set
of stereo monitors could be connected here if surround
monitoring is not desired.
reverb (stereo) returns
These inputs feed the four stereo Reverb Returns.
Naturally, the output of outboard effects, a patch bay, or
XLR connectors could be wired here.
Made in Australia
serial no.
model type
REFER TO MANUAL
BEFORE REMOVING MODULES
PARTS INSIDE
.
NO USER SERVICEABLE
WARNING
DISCONNECT PSU LEAD
Surround Spk (Alt2)
7.1 Input
Main Spk
R
R
R
L
L
L
2Trk1 Mon In
Mix Out
Reverb (Stereo) Returns
Speakers
Aux Sends
SLS, Red Light, TB, Listen
Group Out/Ins Send
Stem Out
8Trk Play/Ins Ret
Console Power
Serial
Headphones
Mix Insert, 2Trk 1,2
MIX OUT, 2254
N25549
