![Neve Custom Series 75 Owner'S Manual Download Page 23](http://html1.mh-extra.com/html/neve/custom-series-75/custom-series-75_owners-manual_1676771023.webp)
23
reverb returns
The Series 75 features four stereo Reverb Returns.
Envisioned input is the output of external devices that
were fed by the consoles Auxiliary Sends. The Reverb
Returns can feed Headphone Outputs 1 & 2, the Main
Mix, and the Monitor Mix. Multiple destinations can be
selected at once.
solo Isolate - When selected, the Reverb Return will not
be cut when a Channel, Group, or another Reverb Return
is soloed. Practical application may be monitoring an
effect when its dry signal is soloed.
HP1 - Routes the Reverb Return to Headphone Output 1.
HP2 - Routes the Reverb Return to Headphone Output 2.
MaIn MIX - Routes the Reverb Return to the Main Mix
Out.
MOn MIX - Routes the Reverb Return to the Monitor Mix
Out.
auxiliary Master
section
The Auxiliary Master Section contains the overall
attenuation controls for the three mono and two stereo
(or a possible seven mono) Auxiliary Sends. Talkback is
available on all Auxiliary Sends.
Auxiliary Masters A & B are stereo sends. These pass
through a balance control before feeding Headphone
Outputs, the Control Room, and/or Auxiliary Outputs
on the rear panel of the Master Section. Envisioned as
headphone sends during recording, they could be used
for other purposes such as stereo effects sends, or 4
mono sends - in which case the pan pot will become a
secondary level control. Auxiliary Masters 1, 2 & 3 are
mono, and can also feed the above destinations.
Headphone sends
The Headphone Sends section allows any of the Auxiliary
Sends to be selected as the source for the headphones.
Multiple sources may be selected simultaneously. All
buttons are recallable.
aux 1, 2, 3, a & B - Selects the signal at the respective
Auxiliary Master, as the Headphone Output source.
Cr Mon - Selects the Control Room as the Headphone
Output source.
Main Mix - Selects the Main Mix, post-fader, as the
Headphone Output source.
Mon Mix - Selects the Monitor Mix, post-fader, as the
Headphone Output source.
L BAL R
L BAL R
L BAL R
L BAL R
0
0
0
0
0
0
0
0
10
0
1
0
1
0
1
REV RET 4
HP 2
HP 1
MAIN
MIX
SOLO
MON
MIX
SOLO
ISO
HP 2
HP 1
MAIN
MIX
SOLO
MON
MIX
SOLO
ISO
HP 2
HP 1
MAIN
MIX
SOLO
MON
MIX
SOLO
ISO
HP 2
HP 1
MAIN
MIX
SOLO
MON
MIX
SOLO
ISO
REV RET 3
REV RET 2
REV RET 1
3
X
U
A
1
X
U
A
AUX2
B
X
U
A
A
X
U
A
R
L
A
B
L
R
L
A
B
L
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
AUX SEND TRIMS
HEADPHONE SEND 2
L BAL R
L BAL R
0
0
0
0
10
10
HEADPHONE SEND 1
AUX 1
CR
MON
AUX 2
AUX 3
AUX A
AUX B
MON
MIX
MAIN
MIX
AUX 1
CR
MON
AUX 2
AUX 3
AUX A
AUX B
MON
MIX
MAIN
MIX