88 Outboard Series / 8804 Fader pack
Issue 2.7
Fader I/O
This 50-way D-type connector is the analogue audio link between the 8816
and the 8804.
This cable is provided with the 8804.
Connect one end to the 8804, connect the other end to the 50 way D-type
socket on the associated 8816 unit.
Please refer to page 18 for connector pin-out information should you need it.
Unpacking
The 8804 is shipped in a purpose made protective box.
Beneath the 8804 unit is a polystyrene floor, underneath this floor should be:
•
a CD containing software and manuals
•
a 50 pin audio cable
•
a USB cable
•
a ribbon cable for installation inside an 8816 unit.
Mounting
The 8804 can be rack mounted, used on a table top or mounted in custom
furniture:
To mount in a standard 19 inch rack the securing screws should be placed
through the mounting holes using plastic washers to avoid scratching the unit
surface.
For table top use, the tilt bar on the rear of the unit should be extended,
supporting the unit at a convenient working angle.
The 8804 may be placed in custom studio furniture using the lip of the unit
for support.
- 7 -