12
NEUTON MA 3.0 Cordless Electric Trimmer Safety & Operating Instructions
Starting Your Trimmer
To start your Trimmer, you must first attach it to the Mower or Power Pod, then start that machine.
The battery in either the Mower or Power Pod powers the Trimmer, making it spin. Make sure the
battery is fully charged before you begin.
1. If you are using your Trimmer on the
NEUTON Mower, set the Mower/Auxiliary
switch to Auxiliary
(Figure 11)
.
Note:
The blade on your Mower does not turn
when the Mower/Auxiliary switch is set to
Auxiliary.
2. Insert the safety key into the key slot. The
green indicator light should come on.
3. Slide the orange start knob to the left.
4. Squeeze and hold the orange control bar.
5. The Trimmer starts (it may take several
seconds).
Continue to hold the control bar for as long as
you want the motor to run.
Note:
For more detailed instructions on starting your Mower or Power Pod, please refer to the
appropriate manual shipped with that machine.
Stopping Your Trimmer
Simply release the control bar to stop the Trimmer.
Important:
The Trimmer will continue to rotate for a few seconds. Wait for the motor to stop
before restarting or moving the Mower or Power Pod.
If you are finished trimming or edging, remember to remove the safety key.
Figure 11. Set the Mower/Auxiliary switch to
Auxiliary
