2
www.neutonpower.com
Battery Pack WARNING Label
286541
DANGER of Electrocution Label on Motor Housing
286691
Table of Contents
Chapter 1: Important Safety Considerations.................................................................................................................................................................................... 2
Chapter 2: Unpacking the NEUTON Battery-Powered Chain Saw and Charging the Battery Pack.............................................................................. 4
Chapter 3: Operating Your NEUTON Battery-Powered Chain Saw .......................................................................................................................................... 6
Chapter 4: Maintaining Your NEUTON Battery-Powered Chain Saw ...................................................................................................................................... 7
Chapter 5: Troubleshooting Your NEUTON Battery-Powered Chain Saw ............................................................................................................................. 8
Chapter 6: Parts List, Schematic Diagram, and Warranty ............................................................................................................................................................ 9
Conventions used in this Manual
This indicates a hazardous situation, which, if not followed,
will result
in
death or serious injury.
This indicates a hazardous situation, which, if not avoided,
could result in death or serious injury
.
This indicates a hazardous situation, which, if not avoided,
could result in minor or moderate injury.
This information is important in the proper use of your tool. Failure to follow this instruction could result in damage to your tool or property.
TIP:
This is a helpful hint to guide you in getting the most out of your NEUTON Battery-Powered Chain Saw.
NOTE:
This information may be helpful to you in using your Saw.
Neuton Power Equipment reserves the right to discontinue, change, and improve its products at any time without notice or obligation to the
purchaser. The descriptions and specifications contained in this manual were in effect at printing. Equipment described within this manual
may be optional. Some illustrations may not be applicable to your equipment.
NEUTON Battery-Powered Chain Saw Product Specifications
Motor
Input
18V
DC
Controls
ON/OFF
Single Trigger Switch w/Release Button
Handles
Soft Grip Rubber over Molded Handles
Chain Saw Housing
Material Injected
Polypropylene
Bar Length
10 inches –Oregon Bar w/Safety Tip Blade & Protective Cover
Weight
9.5 lbs. (including Battery)
Bar, Chain & Motor Oiling
Automatic Pump System w/Oil Level Window
Battery
Pack
(optional)
Voltage
18V
DC
,
2.6
AH
Battery Pack Charger
18V Lithium Charger (optional), plugs into standard electrical outlet
Use only the Neuton Lithium Charger with Neuton Lithium Battery Packs. Do not use the Neuton Lithium Charger with Battery Packs from
other manufacturers or other Neuton products.
Charge Time
30-60 minutes to recharge
Replacement
Easy to snap-in and out of Saw housing
Chapter 1: Important Safety Considerations
We want you to enjoy years of safe and productive use from your NEUTON Battery-Powered Chain Saw. We do not want you injured, so
please take a few moments to read the following instructions for safely operating your new Tool.
Take a moment to study the following labels and make a note of their location
before
you operate the Saw. Replace damaged or
missing safety and information labels immediately.
Battery Charger
WARNING Labels
WARNING Label on Motor Housing
260921
286551
286561
