Assembly and Installation
15
The connection of the
Neuron-Spectrum-1V
system to PC is shown in Fig. 6.
Fig. 6. Connection to PC.
Insert the USB cable connector into the USB socket of the computer system unit. The
system must be connected to the USB port on the system unit or to USB hub powered
from the mains. If the system is connected to the USB connectors on a computer
monitor or keyboard, it may not work correctly. It is strongly prohibited to use passive
USB hubs (not connected to the mains) as a part of the system.
Place and secure the assembled holder for the electronic unit on the table in the im-
mediate vicinity of the veterinary exam table. Secure the holder mount on the assem-
bled holder. Position the electronic unit on the holder mount.
Assemble the photic stimulator and secure it so that the LEDs can be placed in close
proximity (10-30 cm) from the eyes of the examined animal. Connect the cable of the
photic stimulator to the connector for photic stimulator on the top side panel of the
electronic unit.
Connect the needle electrodes to the front panel of the electronic unit.
