LED Light
The device’s LED light has two colors: red and blue. Refer to the chart to see what state
the MindWave Mobile 2 is in.
LED Light
MindWave Mobile 2 State
Meaning
Off
Powered off
MindWave Mobile 2 is turned off or has no
battery.
Solid blue
Powered on
MindWave Mobile 2 is turned on or connected
Solid red
Low battery
Need to replace the battery soon.
IMPORTANT:
Only use alkaline batteries. Do
not use batteries labeled as “Zinc-Carbon” nor
“Heavy Duty”.
Bluetooth Pairing
"Pairing" is when your computer/tablet/phone remembers your MindWave Mobile 2
headset, and your MindWave Mobile 2 headset allows that computer/tablet/phone to
connect to it.
Note that this is different from "connecting", which is when the
computer/tablet/phone is actively sending or receiving data and information.
You must first pair each of your computers/tablets/phones to your MindWave Mobile 2
headset in order for them to connect to each other. To do so:
Turn on the headset, and make sure the Blue LED light is on. Then follow the instructions
below for the device you want to pair to:
Important:
There's no “pairing mode” on the MindWave Mobile 2 headset itself; the headset
is ready to pair when turned on. Please
DO NOT force the power switch to the edge. It will be
damaged.
● For Windows/Android/Mac platform
Refer to the pairing procedure that came with your Windows, Mac or Android device.
Select "MindWave Mobile" device when it appears on the device list. If you see multiple
devices named MindWave Mobile, please select the one shown with a headset icon.
Enter the "0000" as the Bluetooth authentication key if prompted. For full details about
May 14, 2018
| © 2018
NeuroSky, Inc.
All Rights Reserved.
7