Chapter 3
– Setting Up Your MindSet
Figure 3.3: "Add"
3. Put the powered-on MindSet into "Pairing Mode" by holding inwards the Media Button for
three seconds. e red and blue LEDs will alternately ash to indicate "Pairing Mode."
4. At the next window, check "My device is set up and ready to be found" and click "Next"
Figure 3.4: My device is set up and ready to be found
5. "MindSet" should appear in the
Add Bluetooth Device Wizard
. Select it and click "Next". If it
does not appear in the Wizard, make certain your MindSet is in pairing mode (refer to step 3.)
and select "Search Again".
Bluetooth MindSet Pairing
June 10, 2009
| © 2009
NeuroSky, Inc.
All Rights Reserved.
11
Summary of Contents for MindSet
Page 1: ...Instruction Manual...
Page 32: ......
