![background image](http://html1.mh-extra.com/html/neurosky/life-beat/life-beat_user-manual_1676376003.webp)
Confidential
NeuroSky
SM
, 125 S. Market Street, Suite 900, San Jose, CA 95113 (408) 600-0129, www.neurosky.com
Switching Band from Shipping Mode to Unbonded Mode
(
Unbonded Mode
= BLE is always on; MCU is activated; OLED enabled only to display “HELLO” screen;
Accelerometer and ECG sensors are disabled; Band has no security token)
1.
While band is charging (Charging Mode), Unbonded Mode is automatically triggered
2.
Band BLE will begin advertising every 1.3 seconds
3.
Remove band from powered USB port
4.
Replace band arm on finger sensor side USB tongue
5.
Press module button
6.
Band OLED will display “HELLO” for 5 seconds
Charging the Band in Unbonded Mode
(
Charging Mode
= Overrides Unbonded Mode; Accelerometer and ECG sensors disabled; Button disabled for OLED)
1.
When band power is low, remove band arm from finger sensor side to expose USB
tongue
2.
Insert USB tongue into powered USB port
3.
Band OLED will display animated charging battery icon
4.
Band is charging (Charging Mode)
5.
BLE is still advertising every 1.3 seconds
6.
When band is charged, animated charging battery icon will disappear
7.
Remove band from USB port
8.
Replace band arm on finger sensor side USB tongue
Turning Band OFF and ON
(
Power Off Mode
= BLE is off; Accelerometer and ECG sensors disabled; OLED and module button disabled)
1.
When band is ON, press module button for 6-8 seconds
2.
Band displays “OFF” or “POWER OFF”
3.
Press module button within 5 seconds to confirm
4.
Band is OFF
5.
When band is OFF, press module button for 6 seconds
6.
Band is ON