24
Parameter
Description
Latch/Blend
(Infinite Hold)
Latches the hold effect and sets the blend of hold
and reverb. See the Infinite Hold effect description
for more information.
Hold Time
(Sustain)
length of time for the effect to hold
Time
(Gated Plate)
length of time for the gate to remain open
Release
length of time for the reverb to decay after the hold
or gate time has expired
Sensitivity
How sensitive the effect is to the level of the signal.
Increase if the effect does not trigger; decrease if
the effect does not release/reset.
Mix
The
MIX
control changes the balance between the dry and wet
(effect) signals.
The change in effect level is approximately linear in dB above 20%. Below
20%, the effect level accelerates downward, so that it is muted at 0%. How
the Mix control affects the dry signal depends on the
MIX SUM TYPE
selection in the
GLOBAL SETUP
menu.
WET LEVEL VS. MIX
WET
LEVEL
(dB)
MIX (%)
100
75
50
25
-60
-40
-20
0
0
Summary of Contents for Illumine
Page 1: ...ILLUMINE REVERB USER GUIDE v 1 0 1...
Page 57: ...neunaber net...
