Neunaber Illumine, User Manual

Page: 25 / 57

23
PARAMETERS
Each preset has 5 parameters: Mix, Level, and 3 effect-dependent
parameters. Turning the bottom knob while the parameter is displayed
changes the parameter.
Parameter Description
Mix ratio of reverb and dry (input) signals
Level overall level of the output signal
Depth length of the reverb tail, decay time
Tone frequency shape of the reverb signal
Tone Tilt tilt of the reverb’s frequency spectrum
Modulation
Width
amount of variation in the reverb’s acoustic
path lengths
Modulation
Rate
speed of variation in the reverb’s acoustic
path lengths
Shimmer Level amount of shimmer added to the reverb
Frequency
(Shimmer)
center frequency of the spectrum accentuated by
the shimmer effect
Frequency
(Rumble)
frequency range of emphasis for the low octaves
+1/-1 Octave
Mix (Octaves)
amount of octave added to the reverb in proportion
to the input signal
Blend amount of the secondary effect in proportion to
the reverb
Echo Time length of delay time, from 50 to 680 ms
Detune amount of pitch transposition, from 0 to 20 cents
(0.2 semitone)
Attack (Swell) amount of time for the reverb to ramp up