Neunaber ICONOCLAST, User Manual

Page: 6 / 20

CONNECTIONS
Iconoclast should be placed at the end of your signal chain, after your pedals and/
or preamp. Iconoclast is not a load box and must not be connected to the speaker
output of an amplifier.
POWER
Connect a standard 9V DC or 12V DC, 100 mA or greater, center-negative pedal
power supply (not included) to the power input.
HEADPHONE OUTPUT
The 3.5mm stereo Headphone Output is driven by a dedicated amplifier and is
capable of driving the vast majority of commonly-available headphones. It may be
used simultaneously with the stereo outputs.
The Headphone Output may also be used as a separate line output by using a
3.5mm TRS to dual 1/4” TS cable. The connectors will be tip = left and ring = right.
USB PORT
The USB port accepts a micro-B USB cable for connecting to a MacOS or
Windows PC running Iconoclast Software.
INPUTS / OUTPUTS
Refer to the diagrams on the following pages for typical connection scenarios.