Neunaber ICONOCLAST, User Manual

Page: 8 / 20

MONO IN / MONO OUT
The outputs are dual mono: either may be used and
may be a TS (unbalanced) or TRS balanced cable. If
a TRS balanced cable is used, the other end may be
1/4” TRS or XLR.
The output can be run to a mixer, powered speaker/
monitor or recording interface. Since the outputs are
paralleled, you may (for example) run one output to a
powered speaker and the other to a mixer.
The input is a TS cable in the R input only, from
either an instrument, pedal output, or preamp
output. The L input is disconnected.
The Stereo Enhancer in the software should be
off (this is the default setting).
OUTPUT INPUT