Neunaber Expanse Series, User Manual

Page: 8 / 24

6
BYPASS MODE - Selects the type of bypass (if your pedal supports true bypass):
• Buffered— the only option without true bypass installed. For trails bypass,
select this option.
• Relay— true bypass
• 2-Stage— switches to a buffered trails bypass while the footswitch is held down,
then to true bypass when released. This option allows for both trails and true
bypass, where you control the length of the trail.
Important! Buffered bypass must be selected for the Infinity Hold effect.
SECOND SWITCH FUNCTION - Selects a second function for the footswitch,
which is particularly useful for certain effects like echo and shimmer:
• None— no second function
• Tap Tempo with Bypass Priority— bypass is always toggled, tap tempo is set if
footswitch pressed again within 1 second
• Tap Tempo with Tap Priority— bypass is toggled only when the footswitch is not
pressed again within 1 second. This results in a 1 second delay when bypassing
but avoids toggling bypass when setting tap tempo.
• Long Press Enables Right Knob— pressing the footswitch for greater than ½
second enables/disables the right-hand knob. “Disabling” the knob is equivalent
to turning it fully counter-clockwise.