Neunaber Expanse Series, User Manual

Page: 12 / 24

10
ABOUT TAP TEMPO
TAP TEMPO has three selectable options:
• None (no Tap Tempo)
• Tap Tempo with Bypass Priority—bypass is always toggled, and tap tempo is set
only if the switch is triggered again within 1 second
• Tap Tempo with Tap Priority—bypass is toggled only when switch is not triggered
again within 1 second. This results in a 1 second delay in bypassing but avoids
changing bypass state when using tap tempo.
We recommend using Bypass Priority if you rarely use tap tempo. Otherwise, we
recommend Tap Priority.
If you wish to use tap tempo, you must enable this function as described in the
Configuration section. It is not automatically enabled when you load an echo effect
via Expanse software.
To use Tap Tempo, tap the foot switch to the beat (quarter-note tempo). The echo
time will change to the interval between the last two taps. The two taps must be
less than 1 second apart (greater than 60 BPM), because the maximum echo time is
1 second.
The LED will blink the tempo and its blink style indicates whether the pedal is
bypassed or active:
• bypassed: short on, long off
• active: long on, short off