Neunaber Expanse Series, User Manual

Page: 5 / 24

3
The input and output connections are independent. You may—for example—use a
mono input with stereo outputs or stereo inputs with a stereo TRS output.
Important! Input/output 1 and input/output 2 should not be used with two discrete
signals (such as two different instruments).
The USB JACK allows you to plug the pedal into your Mac or PC using a standard
micro-B cable and change the effect using Expanse software, available at
neunaber.net (see the Configuration section for details).
The OUTPUT JACKS (left side) supply output to another effect pedal, an amplifier,
or effects loop return via standard 1/4” (6.35 mm) phone connectors. The buffered
output is capable of driving long cables. If plugging into the input of an amp, you
should use the low impedance (Lo-Z) input if available.
• Output 1 only supplies a summed mono output.
• Both Outputs 1 & 2 supply a stereo output. Using both outputs creates a
stereo signal from a mono input.
• Output 2 only supplies a stereo TRS output.