background image

This product contains no user-serviceable parts.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

California Proposition 65 Warning:

 This product may contain chemicals known to the State of California to cause cancer, birth defects or other 

reproductive harm. While we believe our products are not harmful when used as designed, we provide this warning to comply with 

Proposition 65.

© 2014-2020 Neunaber Technology, LLC. All rights reserved. Neunaber® is a registered trademark of Neunaber Technology, LLC. Echelon™ is a 

trademark of Neunaber Technology, LLC.

SPECIFICATIONS

ELECTRICAL 

Nominal input level

-10 dBV, instrument level

Maximum input level

8 dBV

Input impedance

1M ohm

Output impedance

1k ohm

Level, enabled vs. bypass

0 dB

Frequency response, dry / bypassed

20Hz - 30kHz, +/-1dB

Total harmonic distortion, dry / bypassed

0.01 %

Signal-to-noise ratio, A-weighted

•  dry / bypassed

•  Enabled, all knobs 50%

116 dB

101 dB

POWER

Input

9-12 V DC, 100 mA

Connector

center-negative, 5.5 mm OD x 2.1 mm ID

PHYSICAL

Dimensions

115 mm L, 64 mm W, 46 mm H /  

4.6” L, 2.6” W, 1.9” H

Weight

190 g / 6.7 oz

*Specifications subject to change without notice.

At Neunaber, we love to see what you do with your ‘toys’. We encourage you to tag us in your posts, pictures 

& videos featuring your Neunaber gear. To stay connected, go ahead and follow us on the channels seen 

below. We can’t wait to see what you do!

Summary of Contents for ECHELON ECHO v2






Reviews: